Deck Stain / October 10, 2018 / Bethany Selby.
Earlier to use, mix all cans jointly to ensure uniform color. Even though you are using a standard factory mixed color, you should not throw away this step. You need to a guaranteed that you are starting with the same color and even factory mixed colors can be different from batch to batch. Get an empty 5-gallon pail and put in up to 4 gallons of stain. Mix systematically using a long 3' or so 1" x 2" or mixing paddle. Constantly stir during application. As soon as you get down to the one to two-gallon level add another gallon if you are using a large amount for the entire job. By adding new material at intervals like this little color differences will not a noticed if there is a small dissimilarity in color between batches. Before applying stain, test on a mock-up piece of wood from your deck or in an out of the way place, to confirm the color and look you want. Apply amid the temperatures of 50o and 90oF. Do not apply while hot, wet or windy weather conditions are likely within 36 hours.
Method of Application of Stain.
Apply copiously to dry wood to the point of diffusion; two coats applied wet on wet are perfect, this allows the wood to soak up as much as probable. Do not let to puddle, get rid of any excess after 10 minutes or so. A different dry applicator can a used for removing surplus. The favored application methods are a quality paint brush, an airless sprayer a pump type garden sprayer, stain pad or a short nap roller, 1/4. Individual boards should be stained along their complete length to avoid lap marking. The wood deck staining should saturate all checks or separations. Every single one of open to the elements ends should be stained several times until all wood pores are saturated.
Care and Maintenance.
Stained wood surfaces possibly will need to be retreated every two or three years or earlier depending on weather exposure. A slam inspection of treated surfaces ought to a done annually.